For many sterile liquids, powders, freeze dried formulations, and solid dosage product this means protection against reactive gases such as moisture, oxygen, and/or carbon dioxide. The LIGHTHOUSE laser absorption spectroscopy method for headspace gas analysis enables robust characterization of the primary packaging of sterile pharmaceutical drug product. Seal-Scan® technology provides advanced digital imaging software tools for process control which offers in-depth seal quality analysis. Seal-Sensor is the online configuration for automated inline scanning of pouch seals that will find defects 100% online. Tyvek® gives the premium microbial barrier protection for sterilized medical instruments and pharmaceuticals. Apart from protecting the medical devices and pharmaceutical products from physical damages, medical and pharmaceutical packages also should provide an effective microbial barrier and help to maintain the sterility of the products. Bacteria and viruses with sizes varying from 0.002 to 100 microns are a constant threat to pharmaceuticals and medical devices which in turn can be hazardous to the patients. Some MRFs use vacuum systems to suck out as much flexible plastic packaging at the as possible at the onset before it has a chance to create problems.
FIT-01 can be used to determine impact resistance properties of pendulum of plastic films, sheets, composite films, aluminum foils and other materials in accordance with ASTM D3420. C640 Thickness Tester is a high precision mechanical contact method thickness tester, which can be used for thickness measurement of films, sheeting, paper, corrugated paperboard, textiles, non-woven fabrics, and solid insulation materials, etc. In case of testing vacuum leakage, the container, with the product is put in a vacuum sealed chamber and the pressure inside the chamber is dropped. If improperly manufactured, the walls of the packaging or the region of the seal will begin to leak. The slant leakage test checks different orientations of the package for leakage. Leakage tests allow manufacturers to see if the container can hold the product under different pressures or under different orientation. It is one of the important considerations in packaging material testing methods.
This property of the packaging helps to measure the strength and quality of the materials and helps to determine the suitability of the material for different applications. Our materials testing machines and force measurement instruments are used worldwide to verify package integrity and suitability for transportation, storage and for safety and consumer protection. If your packaging requires special testing, the same machine can be set to perform customised tests. The MultiTest-xt is a versatile tensile & compression tester controlled by a touchscreen console. The twin-column range can be mounted neatly on your bench-top and is ideal for product testing applications according to your own test methods. The MultiTest-i is a versatile tensile & compression tester controlled by software running on a PC. Mecmesin supplied a Coefficient of Friction test system, capable of measuring both the static and kinetic coefficient of friction values.
With the high rate of creation, the quantity of blemishes likewise increments; consequently, it is compulsory and a prime obligation of the makers to test the nature of the granules previously utilizing it to deliver the last item. In this post, we will take in more about the testing of Polymer granules utilizing MFI Tester. To provide customers with nanny- style service, completely solve the customer’s worries. Combined environmental test equipment integrated temperature, humidity, vibration of the three functions of the test box.With rapid temperature change rate, temperature, and humidity integrated test environment and the vibration function. The OTS-Series walk-in temperature and climate test chambers are especially developed for large test specimens. The modular construction and variability in size and equipment is ideally forspecific application. GBPI provide twenty four hour hotline service for international and domestic customers. Our technical and after-sale service team help you to solve all the problems for easy operation and friendly using. One-inch wide samples are cut perpendicular to the seal and pulled apart at a constant speed (usually 12 inches/minute) when mounted in the grippers of the instrument. The force required to separate the two sealed substrates is measured and reported as x lbs/inch width.
The ASTM D638 standard measures the ability of reinforced and non-reinforced plastics to withstand tensile forces. It is an essential test in a world where plastic packaging leads the market, since this test can predict the protective capabilities of the material to tensile forces, which are quite common during shipping and handling, as well as in other situations. Nelson Labs Europe has a long history of successfully partnering with parenteral product and packaging manufacturers and vendors to effectively and efficiently secure regulatory approval for their products. In this case, dose is related to the concentration of the leachable in the drug product while toxicity is related to the identity of the leachable. Thus, the essential analytical task in chemical safety assessment is the discovery, identification, and quantitation of leachables in drug products or extractables in extracts. Material identification and characterization is important at every stage of production. PerkinElmer’s portfolio of polymer solutions gives you the accuracy, sensitivity, and ease of operation your laboratory demands.
InAnalogue Model, the test specimen is placed between the annular clamps and subjected to enhance the pressure using rubber diaphragm and increasing hydraulic pressure at a specific rate until the sample burst. This reading records in the system at a fraction of seconds at which the sample collapses. The value of Bursting Strength is expressed in terms ofKg/cm2from the dial gauge. The result of the test varies on the basis of the specifications of the sample. and exported to more than 40 countries for food, medical, phamarceutical industries. Labthink MFY-01 Leakage Tester is professionally used to meausre gross leak status of package bags, pouches, Bottles, employing ASTM D3078 Bubble emission method. Testing packaging requires an extremely versatile materials testing system due to the varying requirements applicable to the different materials. The RT4 was designed by Hanatek to increase the efficiency and repeatability of rub proof testing. Accurate, repeatable results are achieved using a high definition sensor in contolled measurement conditions.
This packaging testing equipment is used for testing materials such as boxes, cartons, glass, and ceramic. Packaging testing equipment is expected to gain traction in food and beverages industry. The key objectives of food and beverages industry is to ensure longer shelf life of products for avoiding the loss of revenue generation. Also, demand for packaged food is increasing which is increasing production of food and beverages and ultimately driving the growth of packaging testing equipment. Moreover, the environmental factors such as humidity, sunlight, and temperature easily affects the product quality when it comes in direct contact and packaging acts as insulation for these products. This parameter is accelerating the adoption of packaging testing equipment in healthcare and pharmaceutical industry. Our CNAS and ISO 9001 certified company is serving testing equipment of standard configurations in printing, packaging, pharmaceutical and other industries. We have a capable R&D team to meet special request of customers by designing and developing customized equipment for application specific use.
Peel strength is the average load per unit width of bond line required to separate bonded materials where the angle of separation is 180⁰. Bursting strength of combined board is an optional requirement of the various carrier regulations for shipping containers. The bursting strength of the component paperboard is an important control test in the paperboard mill since the conformity of the finished container is generally controlled by the bursting strength of the paperboard. This is a compression machine specifically adapted to test the stacking load / top load carrying capacity of Blow Molded bottles & jars. This machine can also be adopted to test other blow molded products like Trays, Cups, etc. Saicheng™ can help you inspect the physical property of packaging materials and improve the shelf life by controlling packaging quality. Airborne ultrasound technology is one of the most effective non-destructive testing methods for flexible packages.
We create top notch machineries that increase the productivity and decreases the production cost. The “gold standard” of APR testing protocols, Critical Guidance tests are used to confirm that an innovation is fully compatible with the appropriate plastic recycling stream. The testing plan purposely uses a high level of the innovation in each assessment to reveal potential for a negative impact. The tests and measurements made are intended to reflect conditions appropriate to the diversity of processing technologies and customer requirements found in the plastics recycling industry. Any APR member company may perform Critical Guidance tests in their own labs to determine the compatibility of their own technologies or materials with recycling systems. Our leading experts provide insight regarding material properties, strength, durability and performance for medical device and pharmaceutical packaging. They focus on providing tests that work toward package design and have the ability to adjust methods to customize testing. Services include Tensile Test, Tear Test, Puncture Test, Syringe Force, and Sutherland Rub Tests. We can also very accurately determine the thickness of film and shrink properties of packaging films . We can measure the stiffness of films and also determine the strength of heat seals.
The paper products are vastly used in the packaging industries for manufacturing of different kinds of packaging products. Some of these products include the paper boards, cardboards, corrugated sheets, grease proof paper, parchment paper and so forth. Due to the importance of the packaging of different products, it is essential that quality of the products is checked thoroughly without the chance of any errors in the testing procedure or testing data. The packaging testing instruments play a very important role in testing the quality of the paper packaging products. These instruments are designed to have a very high sensitivity so that no abnormalities, no matter how small, is left untested or unnoticed. With the help of the Paper testing instrument, the manufacturers of the products can rest assured that the quality of their products is safe with proper packaging material done. On the other hand, it is beneficial for the manufacturers of the packaging materials to use the instruments as they not only reduce the rejection but also enforce better trust in their customers about their quality as well.
For many clients, the sample that is submitted is the actual product or the portion of the product that contains the plastic. Testing food packaging to make sure it doesn’t contaminate food or break down when frozen or microwaved — but will break down in a landfill. The right packaging also needs to ensure the safe delivery of the product through the supply chain. We report news, gather data and deliver timely information that provides our readers with a competitive advantage. But it is not uncommon for MRF operators to have to shut down their lines completely several times each day to allow workers to go into the machinery and cut out flexible plastics have wound themselves around sortation equipment. While collection programs differ significantly from location to location, most customers have long been able to put in their recycled PET and high density polyethylene containers into curbside mix.
There are manypaper and packaging quality testing machinesthat are utilized in different packaging industries to ensure the quality of the products. Is located in Tongxiang City, which is nearby ShanghaiHangzhou,in the east of China. We will try our best to provide our customer goods with best quality, reasonable prices and considerate service. The high cost of packaging testing equipment is one of the significant challenge affecting the growth of market. The high cost of these testers limits the adoption of these testers from industries present in underdeveloped countries. A print factory needed to test the packaging material they were using in order to improve their processes and establish optimum machinery settings. The company sought a solution, which provided consistent results and reliable performance. Mecmesin advised the company to use a coefficient of friction test to determine the ‘slip’ properties of the packaging. Desmond Hunt, Ph.D., USP’s Senior Scientific Liaison, provides insight into plastic packaging systems for drugs and how USP standards can support quality in this field. Dr. Hunt works closely with USP’s Expert Committee on Packaging and Distribution—the volunteer experts who serve as key decision-makers in the USP standards-setting process.